Skip to main content

Marking a Large Quilt for Stationery Machines

When quilting on a stationery, domestic machine, the overall visibility of a large design gets lost because the quilt has to be scrunched and bunched to fit into the machine and to distribute the weight. For this reason, taking the time to mark accurately is the first step to a successful result. In my experience, too often impatience has led to shortcuts which more often than not leads to regrettable results.

Above is the full size skeleton design of my quilt top, 60" x 80", without borders. Some design details have been drawn on transparent mylar, and overlay the pattern skeleton.

Because this quilt is so large, I did my marking in 3 main steps:
1. Registration Lines - the main division lines in the pattern
2. Skeleton - Outline of all design features
3. Detail -Filling in the shapes

 1. Registration Lines: 
My preferred method for the initial squaring up process and marking of registration lines is done on a clean floor, where the quilt top can be fairly accurately squared up on one flat surface. (Works especially well on a gridded floor, such as parquet.)

Taking one quadrant of the pattern, I found all of my major registration lines: centre cross hairs as well as the borders. Because the registration lines are key to keeping the design balanced and squared throughout the quilting process, I basted them. (Chalk markings would rub off long before the design has been stitched.).

2. Skeleton:
I had a second full size pattern printed which I cut up into the main design sections to create templates, (see below).

  Once borders and center lines were marked, I traced all major design lines using the cut out skeleton as templates. As the lines became faint during the quilting process, I could lay the templates over the top and retrace.

I worked on one area at a time, removing templates as needed to complete the design.

With borders and skeleton marked, I could now remove the top from the floor and move to a tracing table to add detail.

3. Detail:

My tracing table is a large sheet of acrylic that I place between 2 tables of equal height. Underneath the table, I have a raised lamp that I can move around to suit. Working on one quadrant at a time, this is the stage that I add the details.

Aside from the pattern itself,  rulers, a grid template, circular plates, a compass (not shown) and a white chalk marker were my tracing tools.

After testing many different marking options, I realized that the only thing that would show up on this dark teal silk was chalk. My favourite chalk marking pencil is "General's Charcoal White". It stays on better than a lot of other chalk markers, but is also easy to get rid of. A dry sponge (left) works quite well as an eraser.

Between the pattern's heavy black lines and the light table, the design was visible enough to trace.

With the design transferred, the quilt went back to the floor to be sandwiched and basted. 


Although I had transferred a great deal of the detail (more than necessary), I knew that the chalk would rub off long before I would get to all the designs. My hope was that there would be enough of a shadow left that I could use as a guide. The first large motifs that I quilted (main focal points) were fine, but it doesn't take long for most of the chalk to rub off. For this reason, I keep the quadrant that I'm working on near my sewing station and use it to guide me through the process, remarking the details as required.

The quilt is well on it's way. Hoping for a finish before Christmas.

Labels:

Comments

Post a Comment

Popular posts from this blog

The Tristan Quilt at the V & A

On our recent visit to London, one of our first stops was at the Victoria and Albert Museum. Established in 1852 and named for Queen Victoria and Prince Albert, who were strong supporters of it's founding, the museum is a facility that is both educational and cultural, and open to everyone. It is here, in the "Medieval and Renaissance Gallery" that I finally saw the "Tristan Quilt", one of the earliest surviving quilts showing stuffed, corded whitework (known as "Boutis" in France). A Chihuly chandelier hangs in the grand lobby of the Victoria and Albert Museum. Medieval needlework was often a medium for storytelling. It told of wars and conquests, heros and warriors, love won and love lost, etc. Myths and legends were recorded for future generations through the nimble fingers of the artisans. Through the intricately depicted figures stitched into the Tristan Quilt, this classic Norman legend follows Tristan into battle...
6 comments
Read more

Boutis: Traditional French Needlework

" Piqûre de Marseilles" or "Boutis" is a traditional French hand stitched and corded needlework technique, which uses embroidery stitches to create intricate channels that will later be stuffed with yarn, thereby creating a raised design with three layers. It's origins, and it's name, can be traced to the port of Marseilles in southern France to the 15th century. Traditional boutis was a technique invented to embellish otherwise plain white cotton with intricately patterned channels that would later be stuffed with a plump white yarn to give it relief. The resulting corded whitework created an elegant, embossed textile that was much sought after. Not only was it aesthetically appealing, but it also provided warmth and absorbency, so could be used for bed coverings, toilette linens (like towels), clothing items, home decor, etc. The first two photos below are from the collection of Mme. Monique Alphand, a well known French expert and collector of antique t...
3 comments
Read more

Hawaiian Applique Quilting

While on a family vacation in Honolulu, Hawaii just before Christmas, my daughter and I managed to squeeze in a class teaching the basics of traditional Hawaiian quilting. At the end of the class, we both had a 22" x 22" cushion size Hawaiian Applique quilt ready to stitch. The coral coloured "Ulu" pattern below is my daughter's project.  Traditionally, the ulu is the first quilt made for the home to ensure that there will always be food on the table. The "Ulu" (Breadfruit) pattern, designed by John Serrao. It's the designs of these applique quilts that make Hawaiian quilts unique. Each pattern is individual to the maker of the quilt and symbolizes who they are. Although many of the patterns use a similar motif or symbol, (for example the "Ulu" pattern), when adapted by the quilter, it becomes personal to that quilter and unlike any other version. Ideally, each quilter should create her own design, but beginner's are gi...
9 comments
Read more