Skip to main content

Boutis Tabletopper Reaches the Finish Line

Central to this tabletopper is the floral boutis pattern designed by Mme. Francine Born of "Boutis Provence" (www.boutis.fr) that I stitched in a class on boutis with Mme. Born several summers ago in Montpellier, France. The linen/cotton surround is there to provide a framework to the boutis.

Completed tabletopper, with Mme. Born's boutis design central to the whole piece.

After the initial FMQ was completed, the tabletopper lacked energy and life. The particular linen I chose for this project presented a greater challenge then I had anticipated (see my post of May 23/14 http://seamsfrench.blogspot.ca/2014/05/traditional-boutis-meets-fmq.html). Other then removing the boutis from the background and starting again, (which was a less then thrilling prospect), I have tried to give warmth to the piece by embellishing it with contrasting embroidery threads, and, to add some relief, I have filled in the background with a small stipple stitch.

After the initial round of quilting, the stitches completed disappeared into the linen with the very fine tone on tone thread that I had used.  (This would be great at another time, but not for this particular linen). So for this round of remedial stitching, I switched to a heavier embroidery thread with a little contrast and sheen and over stitched parts of the design, hoping that it would highlight some of the areas and add a little life.

The circles were over stitched with a Gutermann Viscose Dekor colour, warmer and more golden then the linen itself.  On either side of the small circles, I used a slightly more subtle colour in the Viscose Dekor thread to enclose the circles with rows of a narrow zig zag.

Between each scalloped petal, I used the warmer shade of thread to overstitch the cross hatch as well as  the circles around the perimeter. The narrow zig zag enclosing the cross hatch, as well as the narrower row around the perimeter, were restitched with the more subtle shade of thread.

To enhance the relief, I used a small stipple stitch around the design motif in each separate petal.


For the binding, I attached a piping very similar in colour to the warmer shade of the Viscose thread, and then completed the border by stitching a wider row of zig zag in that shade of thread.

Close-up view of the finished edging.

The completed back.

With the addition of the stipple stitch to the background and with the embroidery threads highlighting parts of the design, there is now a little more life and relief to the quilt. However, lesson learned; next time I use linen in a quilted project, I will use only the very finest of linens with a much loftier batting. Slightly contrasting thread is also preferable when quilting linen.

Cording additional stuffing through each feather and channel of the motifs would achieve the desired effect, but for now, she will be what she is. Maybe someday?




Comments

  1. Replies
    1. Hi Sue. Thanks for your kind comments and for checking in.

      Delete
  2. You know, I liked it before, but you have really amped it up with the extra threads and embroidery. Plus, I really love the scalloped border. It's a good lesson to me too, to stick with it when you know it can be better. Gorgeous!

    ReplyDelete
    Replies
    1. Hi Monica. Thanks so much for your support throughout this project; it encouraged me to the finish line.

      Delete
  3. Love your incorporation of the zig zag. It really adds to the project and gives it definition. Beautiful!

    ReplyDelete
    Replies
    1. Thanks Karen. I didn't want to go overboard with the embellishments, so I tried to stay subtle, yet give it a bit of a boost. I'm glad you think it works. Thanks for stopping by.

      Delete
  4. Replies
    1. Hi Marjorie. Thanks for kind comments and for stopping by.

      Delete
  5. Replies
    1. Thanks for checking in and for your kind comments.

      Delete

Post a Comment

Popular posts from this blog

Boutis: Traditional French Needlework

" Piqûre de Marseilles" or "Boutis" is a traditional French hand stitched and corded needlework technique, which uses embroidery stitches to create intricate channels that will later be stuffed with yarn, thereby creating a raised design with three layers. It's origins, and it's name, can be traced to the port of Marseilles in southern France to the 15th century. Traditional boutis was a technique invented to embellish otherwise plain white cotton with intricately patterned channels that would later be stuffed with a plump white yarn to give it relief. The resulting corded whitework created an elegant, embossed textile that was much sought after. Not only was it aesthetically appealing, but it also provided warmth and absorbency, so could be used for bed coverings, toilette linens (like towels), clothing items, home decor, etc. The first two photos below are from the collection of Mme. Monique Alphand, a well known French expert and collector of antique t

Amish Hand Quilting in France with Esther Miller

Esther Miller, was born into an Amish family in the U.S., and now lives in Germany where she has for many years taught the techniques and methods of Amish hand quilting to anyone interested in learning these skills. As a child, she would closely watch as the women of her community worked together on a quilt, and eventually she was rewarded with a needle of her own and encouraged to join the group. Through the years, she has mastered these skills and techniques and now generously shares them with anyone who has a genuine desire to learn. Esther Miller in Ste. Marie-aux-Mines in Alsace France. An example of her own work, Esther brings this intricately and perfectly hand stitched wall quilt to class as inspiration for her students.  Last week, at the "European Meeting of Patchwork" in Ste. Marie-aux-Mines, in Alsace France, www.patchwork-europe.com , I had the privilege of taking a 2 day workshop with Esther. The Amish quilting method requires a free-standing simple

Blocking and Squaring Boutis

The door of her cage has been opened. She is free to fly off and find her destiny. After many months of hand stitching and then many more months of cording, my little "colibri" is ready to set off on her own. As this was my first attempt at designing so large a boutis piece, it was a learning curve. All of the tight swirls, curls and circles are a great deal more difficult and time consuming to cord then are the longer more gentle channels. Maintaining an even tension is absolutely necessary throughout the process, so patience comes in very handy when doing the cording. The process of stitching and cording a work of boutis subjects the fabric to a lot of handling and manipulation that can distort the design. For this reason, once all of the stitching and cording is complete, the boutis must be washed, blocked and squared.  The first step of washing is to remove all traces of the marking pencil as well as any soil that may have collected over the many months of working w